This is a static archive of our old forum. Most features inc files and downloads work but some links are now dead
Please refer to Our Website or our Facebook Groupfor latest info.
Please refer to Our Website or our Facebook Groupfor latest info.
Ringwood 2016 equipment hire
- AlanGoodman
- Site Admin

- Posts: 424
- Joined: Thu Nov 06, 2014 9:13 am
- Location: Hemel Hempstead
- Team: Apollo Racing
- Contact:
Re: Ringwood 2016 equipment hire
Please note there is a Facebook discussion on this subject going on (Dave and I have only been added today although it seems to have been open since November).
We really need to make a decision on this ASAP - Is anybody else able to go down to help Phil??
As I said if absolutely necessary I can probably do it but it's not ideal as I'm supposed to be racing in Shrewsbury the day before with BHPC...
We really need to make a decision on this ASAP - Is anybody else able to go down to help Phil??
As I said if absolutely necessary I can probably do it but it's not ideal as I'm supposed to be racing in Shrewsbury the day before with BHPC...
- AlanGoodman
- Site Admin

- Posts: 424
- Joined: Thu Nov 06, 2014 9:13 am
- Location: Hemel Hempstead
- Team: Apollo Racing
- Contact:
Re: Ringwood 2016 equipment hire
I've asked Steph on Facebook to let us know her thoughts here - After that can we please make a decision ASAP so that arrangements can be made if we decide to go ahead.
- AlanGoodman
- Site Admin

- Posts: 424
- Joined: Thu Nov 06, 2014 9:13 am
- Location: Hemel Hempstead
- Team: Apollo Racing
- Contact:
Re: Ringwood 2016 equipment hire
Update:
Jim has indicated on Facebook that we would need to be fitting tags to cars by 8am on the Sunday morning. That is likely to make it a non-starter for me I'm afraid as I'll be home fairly late on the Saturday night.
Jim has indicated on Facebook that we would need to be fitting tags to cars by 8am on the Sunday morning. That is likely to make it a non-starter for me I'm afraid as I'll be home fairly late on the Saturday night.
- dralphs
- Site Admin

- Posts: 553
- Joined: Fri Nov 14, 2014 11:50 pm
- Location: Oxford
- Team: Falcon Notnray
- Contact:
Re: Ringwood 2016 equipment hire
I think realistically anyone would probably be looking at staying over the saturday night somewhere near.
Even for me its a 90 minute journey and that assumes no traffic jams or other issues getting into ringwood itself.
Question for Steph. Rather than camping or expenses of a b&b (which i suspect ringwood would be asked to pay) would it be possible for Phil and whoever is helping him to get put up for the night ina spare room etc????
Even for me its a 90 minute journey and that assumes no traffic jams or other issues getting into ringwood itself.
Question for Steph. Rather than camping or expenses of a b&b (which i suspect ringwood would be asked to pay) would it be possible for Phil and whoever is helping him to get put up for the night ina spare room etc????
Re: Ringwood 2016 equipment hire
Where is this fb discussion?
Have they yet agreed to buy 72 tags?
Have they yet agreed to buy 72 tags?
- AlanGoodman
- Site Admin

- Posts: 424
- Joined: Thu Nov 06, 2014 9:13 am
- Location: Hemel Hempstead
- Team: Apollo Racing
- Contact:
Re: Ringwood 2016 equipment hire
I've just added you to it Jes....
- AlanGoodman
- Site Admin

- Posts: 424
- Joined: Thu Nov 06, 2014 9:13 am
- Location: Hemel Hempstead
- Team: Apollo Racing
- Contact:
Re: Ringwood 2016 equipment hire
I agree with Dave - With a fairly early start and the M25/M3 involved it really means an overnight stay for whoever is doing this - That would mean either not racing at Shrewsbury or going straight there after the race for me...
- Mark Williams
- Site Admin

- Posts: 200
- Joined: Tue Aug 26, 2014 6:58 pm
- Location: East Yorkshire
Re: Ringwood 2016 equipment hire
As I've said before, I cannot commit to being present on the day.
For information:
- The new lap count reader cost us £987.60 in 2015.
- Tags would be £20 each. 72x20 = £1,440
- Dave R received £243.39 & £62.80 in refunds for lap count matt expenditure in 2015.
As this needs to be included in the hire fee as a returnable deposit to cover any scenario where equipment is damaged in some way. Total circa £2,750.00 + expenses for personnel
Has the 'straight run' to go over the matt been resolved yet?
For information:
- The new lap count reader cost us £987.60 in 2015.
- Tags would be £20 each. 72x20 = £1,440
- Dave R received £243.39 & £62.80 in refunds for lap count matt expenditure in 2015.
As this needs to be included in the hire fee as a returnable deposit to cover any scenario where equipment is damaged in some way. Total circa £2,750.00 + expenses for personnel
Has the 'straight run' to go over the matt been resolved yet?
Mark
BFPCR Treasurer
East Yorkshire
BFPCR Treasurer
East Yorkshire
- AlanGoodman
- Site Admin

- Posts: 424
- Joined: Thu Nov 06, 2014 9:13 am
- Location: Hemel Hempstead
- Team: Apollo Racing
- Contact:
Re: Ringwood 2016 equipment hire
No idea... Jim has said there will not be an issue with liability as they will add a clause to the entry form.Mark Williams wrote:
Has the 'straight run' to go over the matt been resolved yet?
We obviously need to be absolutely sure we will not be liable if the equipment fails or of our folks happen to be unwell on the day and can't make it etc...
- AlanGoodman
- Site Admin

- Posts: 424
- Joined: Thu Nov 06, 2014 9:13 am
- Location: Hemel Hempstead
- Team: Apollo Racing
- Contact:
Re: Ringwood 2016 equipment hire
Phil said earlier in this discussion
So we need two additional people who will not be racing at rounds 1 and 2 but will be there to learn the timing system, and an additional laptop or two.Phil.GO wrote:
I am prepared to support the event (no expenses) IF i get support from at least two other people.
These people really need to come to at least 2 of the first 3 rounds of 2016 and run lapcounting with me to "learn the ropes". Also we really need 2nd and 3rd laptops with all the software ready to go.
Further to that contingencies need to be in place for breakdowns at the event and for the following BPCC race.
Phil
Re: Ringwood 2016 equipment hire
I am hoping Apollo will race this one, and therefore would hope to attend in some capacity and maybe blag a room the night before. So getting kit there is not an issue. However, come race start (whichever it is) I will be racing... or at least running a time.
We were actually talking about this the other day. If the BPCC is to have any link to Ringwood I think we should have three golden rules:
It is safe (I have no qualms about this).
It is fair - i.e. rules are clear, sensibly and consistently applied.
It is sport - yes it is also charity and fun, but it should not be forgotten that people who have build / made the effort to attend also want to have a race!
sorry that's digressing I know.
We were actually talking about this the other day. If the BPCC is to have any link to Ringwood I think we should have three golden rules:
It is safe (I have no qualms about this).
It is fair - i.e. rules are clear, sensibly and consistently applied.
It is sport - yes it is also charity and fun, but it should not be forgotten that people who have build / made the effort to attend also want to have a race!
sorry that's digressing I know.
- dralphs
- Site Admin

- Posts: 553
- Joined: Fri Nov 14, 2014 11:50 pm
- Location: Oxford
- Team: Falcon Notnray
- Contact:
Re: Ringwood 2016 equipment hire
I'm happy to "learn the ropes" with Phil where i can whilst also running my team but i suspect that at rounds 1 & 2 i'll probably be on my own and the only laptop i have is a work laptop which probably can't have the software put on.
So that probably limits my usefulness.
Also as Ringwood is between Shenington & Solihull i may have car repairs to do as well as any final details for solihull.
Apart from that i will help out where i can and as i have the 2nd timing kit will probably need to run it down to ringwood (or make arrangements to get it there).
So i could be Phils 2nd man but without a laptop, probably not much use.
So that probably limits my usefulness.
Also as Ringwood is between Shenington & Solihull i may have car repairs to do as well as any final details for solihull.
Apart from that i will help out where i can and as i have the 2nd timing kit will probably need to run it down to ringwood (or make arrangements to get it there).
So i could be Phils 2nd man but without a laptop, probably not much use.
- AlanGoodman
- Site Admin

- Posts: 424
- Joined: Thu Nov 06, 2014 9:13 am
- Location: Hemel Hempstead
- Team: Apollo Racing
- Contact:
Re: Ringwood 2016 equipment hire
Steph says that it is Jim that we need to discuss this with rather than her... We obviously can't give him access to this discussion without giving him access to the whole committee forum.
So we can either discuss this with him via Facebook or whatever or just make a decision and tell him what is required for us to provide timing at Ringwood...
So we can either discuss this with him via Facebook or whatever or just make a decision and tell him what is required for us to provide timing at Ringwood...
- AlanGoodman
- Site Admin

- Posts: 424
- Joined: Thu Nov 06, 2014 9:13 am
- Location: Hemel Hempstead
- Team: Apollo Racing
- Contact:
Re: Ringwood 2016 equipment hire
I've added Chris, Bob and Mark to the Facebook discussion. If any other committee members want to join that just shout.
- dralphs
- Site Admin

- Posts: 553
- Joined: Fri Nov 14, 2014 11:50 pm
- Location: Oxford
- Team: Falcon Notnray
- Contact:
Re: Ringwood 2016 equipment hire
Just seen latest reply from jim
My only question would be who retains ownership of the tags?
Given Marks response of £2,750 + expenses i would say that covers what we requested.Good evening, had a chat with Steph, would you consider £3,000 all in for the lap counting? KR Jim Stride Race Director BPCGP
My only question would be who retains ownership of the tags?

